No Products in the Cart
The U-value (formerly k-value) is the most important value used to rate the energy efficiency of building components. With the new testo 635 measuring this value has never been easier.
Three temperature values are needed to determine the U-value: outer temperature, surface temperature of inner wall as well as indoor air temperature.
This Testo temperature probe to determine U-value has triple sensor system for measuring wall temperature with modelling clay included.
Using the new wireless probes, the outer temperature can be quickly and easily measured with the window closed. The probe is simply positioned outside and transmits readings by radio to the measuring instrument in the room.
With the new patented U-value probe the two other temperatures required are measured using one probe. To measure surface temperature, three wires from the U-value probe are attached to the inner wall using modelling clay. The air temperature is measured by a sensor on the probe plug.
The three temperatures needed are determined by the connected temperature probes and transferred to the testo 435. The instrument calculates the U-value from them and shows it directly in the display.
|Temperature - TC Type K (NiCr-Ni)|
|Measuring range||-20 to +70 °C|
|Accuracy||Class 1 ¹⁾
U-value: ±(0.1 °C + 0.2 % of mv)* *when used with an NTC or wireless humidity probe for measuring outside temperature and 20 K difference between the air inside and outside
1) According to standard EN 60584-2, the accuracy of Class 2 refers to -40 to +1200 °C.
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.