No Products in the Cart
SpeedClean CoilJet HVAC Coil Cleaner System
No Water. No Power. No Problem.
The CoilJet is a portable HVAC coil cleaning system ideal for cleaning evaporator coils and condenser coils in locations where water and power may be inaccessible, such as rooftops and attics. The CJ-125 is designed for portability by including separate water and chemical tanks and a long life rechargeable battery. Expertly clean condenser and evaporator coils no matter where the location may be.
Clean HVAC coils the fast way. The CoilJet from SpeedClean is a complete portable AC coil cleaning system. It carries all the water and coil cleaner you need to clean up to five, 5 Ton units with 125 psi pressure. It is specifically designed for portable condenser HVAC coil cleaning. It replaces the too powerful pressure washer – and the not powerful enough pump sprayer – to quickly clean coils without damage to sensitive fins, even microchannel coils!
The system cleans virtually any single pass HVAC coil. It produces 125 psi of coil washing power at about .6 gallons per minute. A water flow and pressure that cleans quickly, but won’t overwhelm condensate lines on indoor units. This means you don’t have to pull evaporator coils out to clean the coils or use acidic and caustic “self-rising” sprays. Plus the integrated water and chemical tanks eliminate the need to drag hundreds of feet of hose to clean rooftop or remote units.
The rechargeable battery supply lasts up to 12 tanks on one charge and optional accessory wands allow for cleaning the evaporator and condenser coils from the back of units without removal of the top grate and fan blade. For best results add water and SpeedyFoam, an alkaline, acid free, non-caustic biodegradable foaming coil cleaner that delivers penetrating foaming action.
By combining industrial strength technology with a compact, durable design, CoilJet makes cleaning condenser and evaporator coils quick and easy.
|Capacity (water)||3.3 gal. (12.8 L)|
|Capacity (chemical)||1.7 qt. (1.7 L)|
|Pump||Positive displacement diaphragm|
|Output Pressure||125 psi at 0.6 gal/minute|
|Input Power||12A, 12v DC deep cycle rechargeable sealed lead acid battery|
|Dimensions||19” x 10” x 18”|
||22 lbs (net dry) (10 kg); 52 lbs (23.6 kg) (chemical & water)|
How heavy is the CoilJet
The CoilJet weighs 15lbs dry, and approximately 40 lbs when fully loaded with water and cleaning solution. As always, caution should be used when lifting heavy objects.
How long will the battery last?
Two part answer. A full charge will last for approximately 12 tank loads of coil cleaning, so typically all day depending on your usage. As for the life of the battery, it is designed to last for at least 300 full charging cycles – from completely charged to fully drained.
Can I use the CJ-125 while the charger is plugged in??
Yes you can, however, the charger cannot keep up with non-stop operation so the battery will eventually wear down. Therefore plugging in the charger this way will only serve to lengthen operation time, not provide unlimited usage.
Will the CJ-125 damage my coils?
No! The CoilJet is the ONLY washer specifically designed for thoroughly cleaning the delicate fins without damaging them. It does this by forming a unique spray pattern that never surpasses 100 PSI. Depending on the gauge of the fins and the angle of the spray, coil damage can begin occurring at only 125 PSI!
How many condenser coils can it clean on one tank?
This largely depends on the size of the units and how fouled they are. However, it is typical for the CoilJet to be capable of cleaning 2 or 3 five-ton units that require routine cleaning.
Can I clean any types of coils with the CJ-125?
It is effective on many different types of coils including condenser and evaporator coils found in heat pumps, air conditioners, fan coils, PTAC’s, etc. Generally speaking, it is intended for cleaning residential and light commercial size units.
Why is the CJ-125 superior to a pressure washer?
The only way a pressure washer can be used to clean coils without damaging the delicate fins is to hold the spray wand well away from the coils. Spraying a 1000 PSI washer approximately 4 – 5 feet away from the coil surface to avoid damage means only about 100 – 150 PSI. Why bother lugging up a heavy pressure washer and running long lengths of a water hose and extension cords for that?
Why is the CJ-125 superior to a pump sprayer?
A pump sprayer is designed to simply apply a chemical. They typically produce only about 30 PSI at about .2 GPM, therefore, it is not capable of flushing out coils or washing away debris as the CoilJet can. If you have to use harsh chemicals and/or acids to clean coils, the pump sprayer is the right choice.
Why is the CJ-125 designed for low flow?
We know that many of your coil cleaning applications are directly above drip pans that rely on a ¾ ” drain line to route away condensation. The .5 GPM of the CoilJet will easily flow down that drain without overflowing the drain pan and causing water damage. A pressure washer can’t do that!
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty. Please register your product with provided warranty card.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.