The SC480 is the top-of-the-line clamp meter with wireless functionality for the HVAC-R professional. Send your electrical measurements directly to the Job Link® System mobile app.
Not only does this meter communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency.
Electrical Testing for HVACR True RMS readings through the clamp or leads. Inrush current mode to capture starting amps.
Job Link® System Mobile Capability Send and save electrical measurements to Job Link® System mobile App Plus, calculate power (kW) and system efficiency for in depth understanding of system performance in real-world conditions.
Test 3-Phase Power Conveniently test phase rotation without carrying an extra meter or lead
Rugged Dual Display Broad temperature range tolerance that allows for testing in freezers and on rooftops
FEATURES AND CAPABILITIES
Measures Power (kW) for system efficiency
Verify 3-phase rotation with just two leads.
Filter out noise to get true voltage and frequency with low pass filter
Take more accurate VAC and AAC readings with True RMS
Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
Measures start/run capacitors
Magnet for mounting meter during use
Molex tips reach into power connectors
Safety rated CAT IV-600V/CAT III-1000V
SC480INT Bluetooth Clamp Meter
ADLS2 Deluxe Test Lead Set with Gold Plated Tips with Removable Sheath
Operating environment: 32°F to 122°F (0°C to 50°C) at <70%RH
Storage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80%RH (with battery removed)
Temperature coefficient: 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C (82°F to 122°F)]
Measurement rate: 3.3 times per second, nominal
10000 count dual display
Backlight: 5-minute duration with auto-off, blue color
Overrange: “OL” or “-OL” is displayed
Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery life: 100 hours typical alkaline (No wireless, no backlight)
Low battery indication: Battery icon blinks and "batt" is displayed when the battery voltage drops below the operating level
Auto Power Off: Approx. 30 minutes
Altitude: Up to 6562 ft (2000m)
Overload protection: 1000VDC or 750VAC rms unless otherwise stated
Test leads: Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps. Please operate the instrument following all instructions of the operator's manual to avoid impairing the safety of the product.
1 Year from Date of Purchase (excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Case etc)
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.Please register your product with provided warranty card.
DOWNLOAD MANUAL DOWNLOAD TECHNICAL MATRIX Ideal for the HVAC-R professional, the AccuTools® BluVac+ LTE Digital Vacuum Gauge is a state-of-the-art digital vacuum gauge utilizing patented technology to deliver the...
DOWNLOAD MANUAL DOWNLOAD TECHNICAL MATRIX Ideal for the HVAC-R, Industrial, and Scientific professionals, the AccuTools® BluVac+ Pro Wireless Digital Vacuum Gauge is a state-of-the-art wireless digital vacuum gauge utilizing patented...
DOWNLOAD MANUAL Ideal for HVAC and Refrigeration service, including Critical Charging of small refrigeration systems, the patented AccuTools® DS-220R Charging Scale is the most accurate and precise refrigerant meter available...
DOWNLOAD MANUAL The AccuTools® eL-720 Carbon Dioxide Gas Leak Detector is the most technologically advanced of its kind. The eL-720’s minimal power requirements, small size and high sensitivity combine to create...
DOWNLOAD BROCHURE Accutools TruBlu Professional Evacuation Kit with Case TruBlu hose has a 3/4″ internal diameter delivering 16 CFM of conductance speed at 1,000 microns Evacuate 80x faster than 1/4″...