1800 870 382

Call us Toll Free or Chat Now

SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
Fieldpiece True RMS Wireless Power Clamp Meter - SC480INT
Fieldpiece True RMS Wireless Power Clamp Meter - SC480INT
  • SKU: SC480INT

Fieldpiece True RMS Wireless Power Clamp Meter - SC480INT

$614.60
GST included.
    DESCRIPTION

    The SC480 is the top-of-the-line clamp meter with wireless functionality for the HVAC-R professional. Send your electrical measurements directly to the Job Link® System mobile app.

    Not only does this meter communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency.

    Electrical Testing for HVACR
    True RMS readings through the clamp or leads. Inrush current mode to capture starting amps.

    Job Link® System Mobile Capability
    Send and save electrical measurements to Job Link® System mobile App Plus, calculate power (kW) and system efficiency for in depth understanding of system performance in real-world conditions.

    Test 3-Phase Power
    Conveniently test phase rotation without carrying an extra meter or lead

    Rugged Dual Display
    Broad temperature range tolerance that allows for testing in freezers and on rooftops

     

    FEATURES AND CAPABILITIES

    • Measures Power (kW) for system efficiency
    • Verify 3-phase rotation with just two leads.
    • Filter out noise to get true voltage and frequency with low pass filter
    • Take more accurate VAC and AAC readings with True RMS
    • Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
    • Measures start/run capacitors
    • Magnet for mounting meter during use
    • Molex tips reach into power connectors
    • Safety rated CAT IV-600V/CAT III-1000V

     

    WHAT'S INCLUDED

    • SC480INT Bluetooth Clamp Meter
    • ADLS2 Deluxe Test Lead Set with Gold Plated Tips with Removable Sheath
    • ASA2 Alligator Clips
    • 1 x ATB1 Type K Thermocouples
    • 1 x Velcro Straps
    • 9V Alkaline Battery (not installed)
    • ANC12 Padded Case
    • Operator's Manual

     

    SPECIFICATIONS

    • Accuracy: Stated accuracy @ 73°F±9°F (23°C±5°C), <75%RH
    • Operating environment: 32°F to 122°F (0°C to 50°C) at <70%RH
    • Storage temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80%RH (with battery removed)
    • Temperature coefficient: 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C (82°F to 122°F)]
    • Measurement rate: 3.3 times per second, nominal
    • Zero: Automatic
    • 10000 count dual display
    • Backlight: 5-minute duration with auto-off, blue color
    • Overrange: “OL” or “-OL” is displayed
    • Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22
    • Battery life: 100 hours typical alkaline (No wireless, no backlight)
    • Low battery indication: Battery icon blinks and "batt" is displayed when the battery voltage drops below the operating level
    • Auto Power Off: Approx. 30 minutes
    • Altitude: Up to 6562 ft (2000m)
    • Overload protection: 1000VDC or 750VAC rms unless otherwise stated
    • Test leads: Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps.
      Please operate the instrument following all instructions of the operator's manual to avoid impairing the safety of the product.

     

    WARRANTY

    1 Year from Date of Purchase (​excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Case etc)

    AUTHORISED RETAILER

    Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty. Please register your product with provided warranty card.

    SCROLL UP AND "ADD TO CART" TODAY.

    SHIPPING

    Australia-wide Flat Rate shipping of $15.00 per order.
    This includes multiple products up to 5kg only.

    Additional cost applies for orders over 5kg. Contact us for quotation.

    REVIEWS

    RELATED PRODUCTS



    SELLER REVIEWS


    BACK TO TOP