No Products in the Cart
JL3KH6 Job Link™ Charge and Air Kit
Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. Superior distance with +100 metre connectivity!
That means you can see what your Air Handler or Evaporator is doing while you're at the condensing unit.
Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers.
Simply connect your probe to the Job Link App & follow the update procedure. Log multiple parameters at one time to get the right analysis of your system. To obtain a Superheat or Sub-Cool Log, add the refrigerant in the field provided after downloading your data from the JL3PR pressure Probe..... the Saturation Temperatures will show for your readings. Meld the table cells from your JL3PC Pipe Clamp Probe Log... either Suction or Liquid line & your superheat or subcooling values will be presented.
Use the JL3PC to test your delta T. across the filter drier... Temperature differences over 1.0 degrees C need to be monitored for loss of system efficiency.
| Wireless Range | +300 metres |
| Wireless Frequency | 2.4 GHz |
| Battery | AAA (included) |
| Battery Life | 150 hrs typical alkaline |
| Auto Power Off (APO) | 2 hrs (can be disabled) |
| Minimum Device Requirement | BLE 4.0 devices running iOS® 7.0 or AndroidTM 5.0 |
| Connector Type | 45° Standard 1/4” NPT female flare |
| Best Accuracy | ±1 psig (±7 kPa) |
| Measurement Range | 0 to 580 psig (0 to 4000 kPa) |
| Maximum Overload | 800 psig (5500 kPa) |
| Water Resistant | Designed to IP55 |
| Pipe Compatibility | Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia. |
| Accuracy | ±1°F (±0.6°C) |
| Measurement Range | -50°F to 257°F (-46°C to 125°C) |
| Stabilization Time | 3 seconds typical |
| Measurement Feedback | Beeper and LED |
| Water Resistant | Designed to IP55 |
| Flexible Probe | 0.36” (9mm) diameter, 9.25” (235mm) length |
| Best Accuracy | ±1°F (±0.6°C) ±2.5 %RH |
| Measurement Range | -4°F to 140°F (-20°C to 60°C) 0 %RH to 100 %RH |
1 Year from Date of Purchase (excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Case etc)
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty. Please register your product with provided warranty card.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.
