1800 870 382

Call us Toll Free or Chat Now


No Products in the Cart

SpinTools SPIN Flaring Set F6000
SpinTools SPIN Flaring Set F6000
  • SKU: F6000

SpinTools SPIN Flaring Set F6000

GST included.

    F6000 Ultimate Flaring Tools

    Check out these revolutionary tools right now! Using innovative technology, the ORIGINAL F6000 SPIN Flaring Set is a new concept in HVAC tools, ready to quickly flare/expand any copper or aluminium tube, in just a few seconds.

    Super Set of 6-pieces set with the 4 most common HVAC tubing diameters, plus 2 "medium-duty" pieces for larger tubes found in the field.

    F600 SPIN Flaring Set is designed for the most common tubing diameters in HVAC, and it’s recommended for use with both soft and hard copper. The high-temperature method preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks. The F6000 SPIN Flaring Set allows you to connect tubes with ease and without the use of extra fittings; sleeves and unions, turning potential waste into actual profit. To top that, you can flare with the F6000 SPIN Flaring Set in just 5 seconds!


    • Suitable to use with hard copper you just need to preheat the copper
    • Works with soft copper creating fewer cracks
    • Compatible with 1/4″ - 3/8″ - 1/2″ - 5/8″ - 3/4″ - 7/8" tube sizes
    • Flawless flares in five seconds
    • A reusable tool with a long-life design
    • Innovative new technology
    • Universal drill compatibility
    • Heat by friction



    • 6 x Flaring Pieces 1/4″, 3/8″, 1/2″, 5/8″ , 3/4″ & 7/8"
    • 1 x Carry Case
    • 1 x Use Instructions
    • 12-month warranty



    • Model: F6000
    • Copper tube sizes 1/4″ - 3/8″ - 1/2″ - 5/8″ - 3/4″ - 7/8"
    • Material: Steel, Alloy
    • Country of Origin: Brazil
    • Maximum tube wall thickness: 0.8mm (1mm for 5/8th)


    To perform the flare on copper/aluminium tubing, simply attach the corresponding SPIN Tool size to a drill. Because they perform their job using high temperatures and friction, no clamping tools or holders are necessary. No more struggling with the swaging tool. The drill provides strength, not your hands!

    All SPIN Tools are specifically designed to work with drills and/or screwdrivers, with a minimum of 1,800 RPM and 500 watts, for corded drills, or superior and 1,800 RPM and 18V, or superior, for cordless drills. Using the SPIN Tools with a less powerful equipment tool than suggested, may result in decreased and low-quality performances.

    The Flaring SPIN Tools are designed for copper tubing sizes of ¼ ”, ⅜” and ½” with wall thicknesses up to 0.8mm; & 1.0mm for a tubing diameter of ⅝”. Using the Flaring Spin Tools on ANY other diameter than the recommended might cause undesirable deformation and assembling issues.


    Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.




    Australia-wide Flat Rate shipping of $15.00 per order.
    This includes multiple products up to 5kg only.

    Additional cost applies for orders over 5kg. Contact us for quotation.


    Customer Reviews

    Based on 1 review Write a review