No Products in the Cart
Hilmor Infrared Refrigerant Leak Detector
The hilmor Infrared Refrigerant Leak Detector is a hand-held leak detector that uses the infrared detection method. Compared with the traditional leak detector, its sensor has a longer life, higher detection accuracy, greater ease of use, and detects a wider range of refrigerants.
The LDIR150 is equipped with a large, easy to read TFT LCD screen.
This detector is in it for the long haul. The 10-year sensor life will keep up with all of your daily demands.
|Sensor Type||Infrared Spectrum Absorbtion|
|Sensor Life||10 Years (Typical)|
|Maximum Sensitivity||4 grams/year|
|Response Time||3 seconds|
|Warm-Up Time||30 seconds|
|Operating Environment||32°F (0°C) to 104°F (40°C)
at < 75% RH (non-condensing) 32°F (0°C) to 104°F (40°C)
at < 75% RH (non-condensing)
|Display Method||TFT LCD display|
|Notification Mode||TFT LCD display and audio|
|Battery||Built-in rechargable Lithium Battery
3.7V, 3,000mAhBuilt-in rechargable Lithium Battery
|Battery Saver||Automatic Shutdown after
10 Minutes of inactivityAutomatic Shutdown after
10 Minutes of inactivity
|Working Time||6 hours|
|Charging Time||4 hours|
|Certifications||SAE J1627, SAE J2791, SAE J2913, EN14624: 2012|
|Refrigerants Detected||It will detect all halogenated (including Chlorine of Fluorine) refrigerants. This includes, but is not limited to: CFC: R12, R11, R500, R503 HCFC: R22, R123, R124, R502 HFC: R134A, R404A, R410A, R407C CH R600A|
|Weight||14.6 oz. (415g)|
|Size||7.9" x 3.3" x 1.5" (201 mm x 86 mm x 38 mm)|
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.