$252.00 inc GST
Estimated Delivery Between and .
The EH4W Wireless Handle connects to any Fieldpiece accessory head to easily make your accessory heads into standalone wireless instruments. The EH4W handle can both measure whatever accessory head is attached directly to it, as well as receive a second measurement wirelessly from whatever accessory head is attached to the included wireless transmitter, model ET2W.
In addition the EH4W can also send wireless measurements, so you can use it with any Fieldpiece wireless meter, manifold, or system analyzer. Wireless signals can be sent from up to 75’ away, so you can take your wet bulb measurements and have the live data in your hand while working on the condenser.
Wireless range: Up to 75 feet (23m) line of sight
Wireless Frequency: 910MHz to 920MHz (US), 868.1MHz to 868.5MHz (European)
Display: 5000 count FSTN LCD
Measurement Rate: 2.5 times per second, nominal
Battery life: 200 hrs typical with alkaline
Operating enviroment: 32oF to 122oF (0°C to 50°C) at <70% relative humidity
Fieldpiece 2-Port Manometer Pressure. Suitable for Air, LPG & Nat. Gas SDMN5 Whats Included? Dual-Port Manometer - SDMN5 2 – 3/16” Tubes with Brass Fittings 2 – 3/16” to 5/16” Tube Adapters - RMA316 9V Battery (installed) Operator’s Manual Benefits The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. ...
Fieldpiece 2-Port Manometer with inbuilt Air Pump SDMN6 Whats Included? SDMN6 - Dual Port Manometer and Pressure Switch Tester ANC1 - Four Pocket Carrying Case ASP2s - Static Pressure Probes RMA316 - Pressure Tubes Quick Connect Leads Hoses and Y-splitter Hoses with Brass Screw Fittings Benefits The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...