Fieldpiece Job Link Charge and Test Bluetooth Probe Kit - JL3KR4

Take a full system snapshot quickly and easily with the JL3KR4 Refrigerant Charge Test Kit. Superior distance with +100 metre connectivity!

That means you can see what your condensing unit is doing while you're at the Air Handler or Evaporator. Perfect for tuning your TX Valve.

Use it for checking Superheat, Sub-Cooling, System pressures & pipe temps.

Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations.

FEATURES AND CAPABILITIES

Simply connect your probe to the Job Link App & follow the update procedure. Log multiple parameters at one time to get the right analysis of your system. To obtain a Superheat or Sub-Cool Log, add the refrigerant in the field provided after downloading your data from the JL3PR pressure Probe..... the Saturation Temperatures will show for your readings. Meld the table cells from your JL3PC Pipe Clamp Probe Log... either Suction or Liquid line & your superheat or subcooling values will be presented.

Use the JL3PC to test your delta T. across the filter drier. Temperature differences over 1.0 degrees C need to be monitored for loss of system efficiency.

WHAT'S INCLUDED

• 2 x JL3PC Job Link Premium Pipe Clamp Probes
  
• 2 x JL3PR Job Link Pressure Probes
  
• ANC18 Protective Case
  
• 2 x AAA Batteries Per Probe (8 Total)

SPECIFICATIONS

Wireless Range: +100 metres
Wireless Frequency: 2.4 GHz
Battery: 2 x AAA (included)
Battery Life: 150 hrs typical alkaline
Auto Power Off (APO): 2 hrs (can be disabled)
Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or AndroidTM 5.0

Job Link™ Pressure Probe - JL3PR
Connector Type: 45° Standard 1/4” NPT female flare
Best Accuracy: ±1 psig (±7 kPa)
Measurement Range: 0 to 580 psig (0 to 4000 kPa)
Maximum Overload: 800 psig (5500 kPa)
Water Resistant: Designed to IP55

Job Link™ Premium Pipe Clamp Probe - JL3PC
Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
Accuracy: ±1°F (±0.6°C)
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: 3 seconds typical
Measurement Feedback: Beeper and LED
Water Resistant: Designed to IP55
Patent: Pending

WARRANTY