Fieldpiece - Imperial & Fieldpiece HVAC-R Apprentice Tool Kit - SO1
Sold Out $807.20
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION If you are just getting started in this industry this is the must have starting kit to get your career off to a great start. This pack provides a lot of top quality tools at a great price. To become a great tradesman you need the right tools, so look no further and get started now. All this gear usually sells for over $800 so be sure to get in quick as we will only have 10 of these packs available!! This tool kit comes with the following gear: Imperial...
Fieldpiece 150mm Pitot Tubes - ASP2
Sold Out
PRODUCT DESCRIPTION Set of 2 x 115mm 90 degree magnetic probes.Use for in duct static pressure measurement across: Filter banks Chilled Water Coils Condenser coils Evaporator coils Fan DP measurement For use with Fieldpiece SDMN5, SDMN6, ADMN2 products. AUTHORISED RETAILER Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty. Please register your product with provided warranty card. SCROLL UP AND "ADD TO CART" TODAY.
Fieldpiece 2-Port Manometer - SDMN5
Sold Out
PRODUCT DESCRIPTION Use for Static Pressure, Differential Pressure, LPG & Natural Gas PressureThe SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function that conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and...
Fieldpiece 2-Port Manometer with Inbuilt Air Pump - SDMN6
$543.00
PRODUCT DESCRIPTION The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches...
Fieldpiece 2-Valve Digital Manifold with Data Logging and Micron Gauge - SM380vINT
$939.00 $952.50
PRODUCT DESCRIPTION DOWNLOAD BROCHURE The newly designed Fieldpiece Manifolds are stronger and more robust than ever before. The SM380VINT is simply next level with NEW heavy-duty casing, reinforced hook, water and impact-resistant screen. The strategically placed thermocouple ports, and hermetically sealed sight glass, all ensure the SMANs are ready to withstand the rigours of field use. They come with a built-in micron gauge for measuring vacuum. The SM380VINT is designed for Refrigeration & Air Conditioning Technicians to work the way you do with advanced features to streamline your job and provide your customers with the answers they need. FEATURES AND...
Fieldpiece 400A Amp Clamp Accessory Head - ACH4
Sold Out
PRODUCT DESCRIPTION The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The amperage is converted to mVAC for reading directly on the meter. The ACH4 works with the Fieldpiece “Stick” meters HS26,HS33,HS35 & HS36. Also use with the EHDL1 Electronic Handle, EH4W Wireless Handle, DL3 Data Logger, the HG2 and HG3 HVAC Guide® System Analyzers, or any other digital multimeter (with mVAC range) connected by Fieldpiece ADLS2 detachable silicone leads or AHDL1 handle adapter. FEATURES AND CAPABILITIES Connect directly to any Fieldpiece stick meter (shown attached to HS36) Remote the amp...
Fieldpiece Air Velocity and Temperature Accessory Head - AAV3
Sold Out
PRODUCT DESCRIPTION The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes. FEATURES AND CAPABILITIES The AAV3 Anemometer Air Velocity and Temperature Accessory offer several features and benefits to...
Fieldpiece Auto and Manual Ranging Stick MultiMeter - HS35
$417.00
PRODUCT DESCRIPTION DOWNLOAD BROCHURE The HS35 manual and auto ranging multimeter includes the tests you use everyday for HVACR field service. Like the rest of the HS30 series, the HS35 works with all of our accessory heads. It comes equipped with a magnetic hanger, detachable silicone test leads and alligator clip probe tips for remote and easy one-handed testing, as well as the full set of built-in safety features. Built-in temperature with excellent compensation and capacitance ranges are a big plus. The removable tip test leads and alligator probe extensions make safe one-handed testing a snap. The k-type thermocouple port...
Fieldpiece Blow Molded Case for Refrigerant Leak Detector SRL2 or SRL8 - ABMK3
$82.00
PRODUCT DESCRIPTION The ABMK3 is best recommended for technicians who purchased the SRL2 Infrared Refrigerant Leak Detector Kit when it originally came with the soft-sided ANC7 case. Features rugged blow molded construction and stands up to the rigors of HVACR field service. With RFE2 9-inch Flex Extension Probe and RRE2 9-inch Needle Tip Probe in the case, the ABMK3 upgrades your leak detector kit to include everything in the SRL2K7 kit The ABMK3 holds the Fieldpiece Advanced Infrared (IR) Refrigerant Leak Detector, model SRL2, or, the Heated Diode Refrigerant Leak Detector, model SRL8. SPECIFICATIONS Material: Blow-molded plastic : 11”H x...
Fieldpiece Carbon Monoxide Detector Accessory Head - ACM4
Sold Out
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION The ACM4 is a carbon monoxide detector (CO detector) accessory head for use with Fieldpiece modular instruments. It has a fast reacting electrochemical sensor specifically designed to detect Carbon Monoxide (CO). Use the ACM4 to hunt down sources of potentially life-threatening, poisonous gas. And easily replace the sensor in the field when necessary. Carbon Monoxide (CO), a product of combustion is an odourless, colourless gas. Faulty combustion equipment is one source of this dangerous gas known as the "silent killer". The ACM4 carbon monoxide detector measures CO in parts per...
Fieldpiece Carbon Monoxide Meter (CO) with Smart Sensor - SCM4
$493.00
PRODUCT DESCRIPTION The SCM4 Carbon Monoxide (CO) Detector has a very fast reaction time and measures CO in parts per million (ppm). Its electrochemical sensor is fast enough for walk-around tests. The "Walk-Around" Test: The SCM4 responds to changes in CO levels in real-time. Zero the unit outdoors away from any source of CO (will not zero if CO levels are higher than 5ppm) Enter the structure Walk around and watch the display Move toward the area of highest concentration to find the CO source FEATURES AND CAPABILITIES The SCM4 Carbon Monoxide Detector (CO Detector) offers several features and benefits...
Fieldpiece Carbon Monoxide Smart Sensor Replacement - RCM4
$331.00
PRODUCT DESCRIPTION The RSCM4 Replacement Carbon Monoxide Smart Sensor is pre-calibrated at two levels for the best accuracy. It comes packaged with a Certificate of Calibration. With normal use, the RCM4 lasts for approximately two years. Sensor life is highly dependent on exposure to contaminants, and repeated exposure to contaminants will shorten the life of the sensor. AUTHORISED RETAILER Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty. Note: We do not warrant CO Sensors due to the nature of use.
Fieldpiece Classic Style Multimeter - LT83A
$158.00 $180.63
PRODUCT DESCRIPTION Classic Style Digital Multimeter for HVAC/R - Expandable with All of the Electrical Basics The LT83A is a basic classic style multimeter at a great price. It’s a manual ranging meter that includes common HVACR electrical parameters. Add our optional detachable test lead set, and the LT83A works with our accessory heads to test non-electrical parameters too. The LT83A meter measures voltage, resistance, amps, continuity and more. Test leads store in the meter body along with the tilt stand and magnetic hanger. The body is constructed of durable ABS plastic and a blue backlight makes the large LCD...
Fieldpiece CO2 Infrared Leak Detector Kit R-744 - SCL2
$870.00 $879.73
PRODUCT DESCRIPTION DOWNLOAD BROCHURE The SCL2 is a portable CO2 (R-744) leak detector with a superior combination of sensitivity, speed, sensor life, battery life, portability, and ease of use. Find leaks Find leaks on commercial refrigeration systems, restaurant soda machines, or any other system using R-744. Pinpoint tiny leaks in high concentration CO2 environments with ease. Gas is pumped through the tip of the wand into the sensor within the SCL2 body. The sensor detects changes in concentration, not absolute concentration, allowing the SCL2 to differentiate CO2 concentrations higher than concentrations normally found in ambient air. The SCL2 detects leaks...
Fieldpiece Combination Mini Clamp Meter - SC240
$231.00 $251.66
PRODUCT DESCRIPTION INSTRUCTION MANUAL AND SPEC SHEET The SC240 Compact Clamp Meter with Temperature packs a big punch in a compact meter. With features that rival many full-sized clamp meters, this auto ranging digital multimeter packs a ton of functions into a compact, easy to handle shape. It includes temperature in both Fahrenheit and Celsius, capacitance as well as non-contact voltage indicators. It also packs in most of the other HVACR ranges you use everyday. Some technicians use the SC240 as their everyday DMM, others as a back-up or second meter to get more testing done in less time. This...
Fieldpiece Combustion Analyser Auto Air Pump - SOX3
Sold Out
PRODUCT DESCRIPTION The SOX3 Combustion Check is a great tool to easily tune furnaces when a full combustion analysis isn't necessary. Designed specifically for HVACR pros, the SOX3 provides all the essential measurements needed to tune most combustion equipment. It directly measures %O2 and flue temperature, and calculates %CO2, %Excess Air, and combustion efficiency. Fast, Easy, Furnace Tuning Measures flue temp and %O2 Calculates %CO2, %EA, and combustion efficiency Hands-free testing with magnet, R-cone, and automatic pump Programmable for custom fuel types Like all Fieldpiece products, the SOX3 Combustion Check Tool was designed to help HVACR professionals do more with...
Fieldpiece Compact Clamp Meter - SC220
Sold Out
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION INSTRUCTION MANUAL AND SPEC SHEET The Compact Clamp Meter, model SC220, incorporates a lot of big meter functions into a compact, easy to use design. While it’s not exactly an all-in-one multimeter, this auto ranging digital multimeter is an affordable meter for the HVAC-R electrical testing HVAC-R professionals use everyday. Along with standard multimeter ranges, we designed the SC220 to include microamps DC for flame rectification. Add to that, we designed it with built-in non-contact voltage and a continuity beeper to give you a powerful HVAC-R meter that’s under 8-inches...
Fieldpiece Compact Service Tool Bag - BG36
$198.00
PRODUCT DESCRIPTION DOWNLOAD BROCHURE BG36 Compact Inspection Tool Bag The BG36 Inspection Tool Bag is an easy to carry, over the shoulder bag with an easy to open pop top. It provides extra space for small tools and drill bits, while the strong magnetic tray holds cabinet screws and washers so they’re never lost. Quick locking magnetic closure Isolated pockets for test instruments Weather protected sturdy base Compact rugged design for Service Technicians Sectioned interior pockets keep everything organised. Zippered side pocket and large interior adjustable section protect meters from hand tools. A large open front pocket and expandable side...
Fieldpiece Deluxe Lead Kit For Multimeter - ADK7
$82.00
PRODUCT DESCRIPTION The ADK7 deluxe silicone lead is the optimal way to test most electrical parameters you run into during field service. The kit includes the ADLS2 silicone leads and ASA2 alligator leads plus RCT2 probe tips. HVAC techs often remove the black probe tip (common) and insert the black alligator lead for an extended reach from ground. When used with our stick meters, the Volts (red) probe tip is inserted into the top of the meter for easy one-handed testing. Use both alligator extension to perform “no-hands” tests. Silicone test leads deliver better performance in temperature extremes than test...
Fieldpiece Deluxe Silicone Removable Tips - ADLS2
$66.00
PRODUCT DESCRIPTION The ADLS2 lead set features gold plated tips, removable tip sheaths, high copper strands and are silicone insulated. They offer basket style strain relief and fit inside the test lead holders on all Fieldpiece meters that have built-in holders. They’re rugged and stand up to high and low temperatures better than traditional vinyl test leads and don’t become brittle in extreme cold. WHAT'S INCLUDED? ADLS2 Deluxe Silicone Test Lead Set with removable standard probe tips SPECIFICATIONS Length: 1 meter Max temperature: 302ºF (150°C) Insulation material: Silicone Probe tip type: Straight removable Plug type: L-shaped banana (industry standard) AUTHORISED...
Fieldpiece Diagnostic Psychrometer - SRH3
$364.00
PRODUCT DESCRIPTION The SRH3 In-duct Psychrometer is a great tool to properly charge fixed restrictor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test. To assist HVACR professionals to get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator! The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct and ensures that the probe is properly aligned. With the quick...
Fieldpiece Digital Megohm Meter - SMG5
$251.00
PRODUCT DESCRIPTION The Fieldpiece Digital Megohm Meter, model SMG5, is a compact standalone meter designed for checking HVAC compressor insulation. The SMG5 provides a 1000V voltage source, monitors current, and displays the resistance between the test points. The maximum current output is <1mA. It can be used to determine the condition of insulation from winding to ground in a motor, compressor, or transformer. Includes a case, alligator clip lead tip and leads with removable tips. To test resistance, a Digital Multi Meter supplies low voltage (<1V) to the test points and is capable of delivering only a few milliamps. It's...
Fieldpiece Digital Multimeter - LT17A
Sold Out
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION Classic Style Digital Multimeter with Temp, MFD, Microamps, Frequency and Backlight. This manual ranging meter covers the parameters and ranges you need for most HVAC&R applications. The LT17A meter measures current, resistance, voltage, capacitance, frequency, continuity, and temperature. Test leads store in the meter body and, with the probe tips removed, connect to any Fieldpiece accessory head. The body is made out of durable ABS plastic and comes with a bright blue backlight for poorly lit test areas. Get great accuracy using the included k-type thermocouple and an easily accessible temperature...
Fieldpiece Digital Refrigerant Scales 50KG - SRS1
$353.00 $381.99
PRODUCT DESCRIPTION Perfectly suited for the Residential or Light Commercial Technician with a weighing range up to 50 kgs in increments of 0.01kg. The new SRS1 refrigerant scale is big enough to comfortably fit a canister but compact and lightweight enough to carry easily. Weighs up to 110 lbs (50 kgs) in increments of 0.25 oz (0.01kg). Heavy Duty The SRS1 has the ruggedness needed for the HVACR field with thick aluminium walls to maintain accuracy, and rubber feet and rubber pad to soften the impact of daily use. It's also water-resistant. The scale itself can withstand a downpour, while...
Fieldpiece Digital Vacuum Meter - SVG3
$342.00 $352.64
PRODUCT DESCRIPTION The SVG3 Digital Micron Vacuum Gauge is a compact, rugged gauge that is loaded with features HVAC-R professionals need to help them do more. It includes a large, dual display with a rate indicator, alarms, timer, rugged rubberised case, and a hook at strap that allows the vacuum gauge to be hung at any angle. The SVG3 contains features to make evacuations easier and faster. The display has a bright backlight for high visibility in any situation. To minimise leaks the SVG3 has a Schroeder depressor that can connect directly to your core removal tool, or directly to...
Fieldpiece Digital Vacuum Micron Gauge Accessory Head - AVG2
Sold Out
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION The Fieldpiece Digital Vacuum Gauge Accessory, model AVG2, is a thermistor based digital multimeter accessory that digitally measures a vacuum of 50 to 2000 microns and converts that reading into millivolts DC on your compatible DMM or our electronic handle and data logger. LEDs provide a pump down indicator showing progress from atmospheric pressure. The sensor has been designed to withstand pressures up to 500 psi (3400kPa) so that no damage to the AVG2 will occur if it is exposed to full system pressures. FEATURES AND CAPABILITIES Designed for HVAC-R,...
Fieldpiece Digital Wireless Refrigerant Scales 115KG - SRS3
$569.00
PRODUCT DESCRIPTION DOWNLOAD BROCHURE The SRS3 Wireless Refrigerant Scale combines modern wireless electronics and rugged materials to perform at the high level you demand for HVAC-R The SRS3 Wireless Refrigerant Scale combines modern wireless electronics and rugged materials to perform at the high level you demand. The platform is made of thick aluminium to maintain accuracy over the life of the product. Rubber pad and bumpers cushion both the tank and the scale itself. A new wireless protocol sends platform measurements to both the included remote display and the Fieldpiece Job Link® System Mobile App. Platform electronics are sealed to...
Fieldpiece Dual Display 400AAC Swivel Clamp Meter with Temperature - SC620
$354.00 $379.08
PRODUCT DESCRIPTION This Swivel Clamp Meter comes packed with HVAC-R Measurements needed for day to day testing. The SC620 swivel-head clamp meter is packed with all the electrical measurements HVACR professionals use everyday. It also includes a host of safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing. As far as ranges go, the SC620 clamp meter has temperature, capacitance, and microamps DC for flame diode tests. It’s a rugged workhorse you can count on to get the job...
Fieldpiece Dual Display True RMS AC Clamp Meter with Backlight - SC440
$467.00
PRODUCT DESCRIPTION DOWNLOAD USER MANUAL The essential meter for HVAC-R The mid-size essential clamp meter has virtually every parameter for electrical and thermal HVACR testing in one meter. This auto and manual ranger includes a host of safety features including a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder with detachable leads, and alligator probe tips for easy one-handed testing. As far as ranges go, it has temperature, capacitance, microamps DC for flame diode tests, and everyday electrical ranges for HVACR. Not to mention it is one of the most durable meters in the...
Fieldpiece Dual Display True RMS Clamp Meter - SC420
Sold Out
Note: This product is out of stock. No Restock Date. PRODUCT DESCRIPTION DOWNLOAD USER MANUAL The SC420 is an essential meter for HVACR professionals. It’s an auto or manual ranging clamp meter that includes the electrical ranges students and technicians use for most HVACR work, plus temperature, capacitance and duty cycle - all for a great price. It also has several safety features like a high-voltage LED and beeper, a continuity warning, push button non-contact voltage (NCV), a lead holder on the clamp, and MAX hold so you can concentrate on the test point, hook up, and see the results after you’ve disconnected....
Fieldpiece Dual In-Duct Coil Psychrometer - SDP2
Sold Out
PRODUCT DESCRIPTION The SDP2 Dual In-Duct Psychrometer is more than just your everyday HVACR psychrometer. It gives HVACR professionals more insight into HVAC evaporator performance than any other psychrometer because it takes four evaporator measurements at one time: supply wet bulb, supply dry bulb, return wet bulb and return dry bulb. So HVACR professionals get a live, real-time snapshot of the evaporator performance, even while conditions are changing. Based on these live, dynamic readings, the SDP2 Dual In-Duct Psychrometer registers system changes as they happen, and automatically calculates actual Delta-T, Target Delta-T, actual Evaporator Exit Temperature, and Target Evaporator Exit...
Fieldpiece Dual Input Temperature Meter - ST4
$197.00
PRODUCT DESCRIPTION The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with the optional ATWB1 wet bulb thermocouple to help you find target superheat or...
Fieldpiece Dual Port Manometer Accessory Head - ADMN2
$277.00
PRODUCT DESCRIPTION The ADMN2 is a portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar. The modular design of...
Fieldpiece Dual Temperature Accessory Head - ATH4
$162.00
PRODUCT DESCRIPTION The Fieldpiece Dual-Temperature Accessory, model ATH4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ATH4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ATH4 to find delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 on your Fieldpiece meter, handle or data logger. Fieldpiece offers a wide variety of k-type thermocouples for various HVAC specific applications. Use pipe clamp T/Cs with the ATH4 to check for blocked filters. Use wet and dry bulb thermocouples...
Fieldpiece Electronic Handle - EHDL1
$93.00
PRODUCT DESCRIPTION Convert any Fieldpiece accessory head instrument into a standalone with the Electronic Handle model EHDL1.It features a MAX/MIN button to record the highest and lowest reading and a HOLD button to hold the reading. The EHDL1 has a 200 and 2000 mVAC for use with our Amp Clamp, model ACH4 and the 200 and 2000mVDC range is for use with the rest of our accessory head instruments. SPECIFICATIONS Resolution: 0.1 mV Accuracy VDC: ±(0.5%rdg + 1dgt) Accuracy VAC: ±(1.2%rdg + 3dgts) 50~500Hz., Overload protection: 30VDC or 24VAC WARRANTY 1 Year from Date of Purchase (excludes Consumables such as...
Fieldpiece Expandable Manual Ranging Stick Multimeter for HVAC-R - HS33
$316.00
PRODUCT DESCRIPTION Full Featured for HVAC & Refrigeration The HS33 Multimeter is a great entry-level modular multimeter. Like every Fieldpiece meter, it's packed with the features and functions HVACR technicians need to get the job done. The ergonomic shape fits firmly and naturally in your hand while testing. The magnetic hanger, detachable test leads and alligator clip probe tips, allow you to perform tests hands-free. Because this multimeter has all the basics and more for a great price, many schools prefer it for their HVACR students. The rugged rubberized bumpers help this meter stand up to tough conditions in the...
