$257.89 inc GST
Estimated Delivery Between and .
The Testo 410-1 vane anemometer measures air velocity and air temperature. Use it to carry out quick spot measurements at ventilation grilles (air outlets). The anemometer is also ideal for use outdoors. It displays the units m/s, km/h, fpm, mph and kts, and also calculates wind chill and the Beaufort wind force.
The 410-1 vane anemometer is impressive thanks to its practical pocket size design and is ideal for fast check measurements. With a measuring range of 0.4 to 20 m/s, the anemometer can even be used for low flow speeds.
The anemometer has a permanently mounted vane with a diameter of 40 mm. You can therefore use it for the integral measurement of air velocity at ventilation grilles (air outlets).
The anemometer is practical for outdoor operation: as well as air velocity and air temperature, the Testo 410-1 also calculates the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
Anemometer with 40MM vane
2 in 1 Air Velocity & Air Temperature
Windchill calculation for outside areas
Timed mean value calculation
The testo 410-1 includes a plug-on protective cap, as well as a wrist strap for secure measurement, and enables you to take advantage of the following functions:
Single-point averaging: provides information on the average air velocity, e.g. at air outlets
Hold function: is used to record the current values relating to air velocity and air temperature and compare them with each other
Max/min values: get the minimum or maximum values since the anemometer was last switched on or reset, at the touch of a button
Illuminated display: read off your readings even in dark environments
User defined units: for air velocity and temperature: m/s, km/h, fpm, mph, kts, Beaufort, °C, °F and wind chill
|Storage Temperature||-20 to +70 °C|
|Operating temperature||--10 to +50 °C|
|Battery type||2 AAA micro batteries|
|Battery life||100 h|
|Dimensions||133 x 46 x 25 mm|
|Measuring range||NTC Air Probe||-10 to +50 °C|
|Vane||-10 to +50 °C|
|Accuracy||NTC Air Probe||±0.5 °C|
|Resolution||NTC Air Probe||0.1 °C | 0.1m/s|
Smart Probes - Heating Set (testo 510i / testo 805i / testo 115i) Download Brochure FAQ The compact heating set with the testo 115i clamp thermometer, the testo 510i differential pressure measuring instrument and the testo 805i infrared thermometer is ideal for important measuring tasks performed by heating engineers. Key Features: All necessary measuring instruments in a handy bag Check measured data wireless on mobile device Data log and plot data graphically and in excel spreadsheet format on mobile device Send measured value report in .pdf or excel file format via email The advantages of the heating set In conjunction...
Smart Probes - Refrigeration Set (2x testo 549i / 2x testo 115i) Download Brochure FAQ The testo smart tools refrigeration set is a combination of four instruments to measure high-side and low-side pressures and temperatures of A/C and refrigeration systems. Configured to be used during commissioning, servicing, PM and troubleshooting A/C and refrigeration systems. This kit can be operated with no tools other than your smart phone to communicate with the instruments. Key Features: Measures CFC, HFC, HCFC, N, H2O, CO2. Hose free installation on refrigeration systems. Easy calculation of Super heat & Sub cool. Report creation and transfer via...
Smart Probes - VAC Set (testo 405i / testo 410i / testo 605i / testo 805i) Download Brochure FAQ The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multi outlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system Key Features:Measures air...