$844.00 inc GST
Estimated Delivery Between and .
The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multi outlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system
Measures air velocity, temperature, relative humidity, wet bulb / dew point, volume flow.
Kit includes instruments to measure, balance, troubleshoot, and optimise ventilation systems performance.
RH & air flow measurements in-duct and at registers viewed simultaneously
Calculation of enthalpy with air flow & RH probes; App allows you to photograph objects with smart device.
The measuring instruments in the testo Smart Tools VAC set can be connected quickly and easily to your smartphone or tablet via Bluetooth. You can therefore measure air velocities, humidity, volume flows and temperatures with intuitive ease using the testo Smart Tools App. The measuring instruments are easy to transport in the handy testo Smart Case and always to hand when needed.
testo 405i: thermal anemometer with smartphone operation
- Measurement of air velocity, volume flow and temperature
- Simple configuration of the dimension and geometry of the duct cross-section for measuring the volume flow
- Telescopic tube which can be extended to 400 mm
testo 410i: vane anemometer with smartphone operation
- Measurement of air velocity, volume flow and temperature
- Display of the volume flow of multiple outlets in order to adjust systems
- Easy parametrization of the outlet (dimension and geometry)
testo 605i: Thermohygrometer with smartphone operation
- Measurement of air humidity and temperature in rooms and ducts
- Automatic calculation of the dew point and wet-bulb temperature
testo 805i: infrared thermometer with smartphone operation
- Non-contact infrared measurement of surface temperature
- Measuring spot marking via highly visible 8-point laser circle
- Easy selection of emission level via stored materials list
- Image documentation with readings and measuring spot marking
Measurement data is transmitted wirelessly from the relevant measuring instrument to the testo Smart Tools App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. The App also offers practical functions such as timed and multi-point mean calculation, volume flow configuration, comparison of several volume flows at various outlets, automatic calculation of the dew point and wet-bulb temperature and identification of areas susceptible to mould via a clear traffic light system. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.
iOS 8.3 or later
Android 4.3 or later
What's Included: testo 405i, testo 410i, testo 605i, testo 805i, testo Smart Case (VAC), batteries & calibration protocol.
|testo 405i||testo 410i||testo 605i||testo 805i|
|Instrument Sensor||Hot wire||Vane||Humidity – capacitive||Infrared|
|Measuring range||0 to 30 m/s||0.4 to 30 m/s||0 to 100 %RH||-30 to +250 °C|
|Accuracy ±1 digit||±(0.1 m/s + 5 % of m.v.)
(0 to 2 m/s)
±(0.3 m/s + 5 % of m.v.)
(2 to 15 m/s)
|±(0.2 m/s + 2 % of m.v.)
(0.4 to 20 m/s)
|±(1.8 %RH + 3 % of m.v.)
at +25 °C
(5 to 80 %RH)
|±1.5 °C or ±1.5 % of
reading 0 to +250 °C)
±2.0 °C (-20 to -0.1 °C)
±2.5 °C (-30 to -20.1 °C)
|Resolution||0.01 m/s||0.1 m/s||0.1% RH||0.1 °C|
|Measuring range||-20 to +60 °C||-20 to +60 °C||-20 to +60 °C||-|
|Accuracy ±1 digit||± 0.5 °C||± 0.5 °C||±0.8 °C (-20 to 0 °C)
±0.5 °C (0 to +60 °C)
|Resolution||0.1 °C||0.1 °C||0.1 °C||-|
|Storage temperature||-20 to +60 °C||-20 to +60 °C||-20 to +60 °C||-20 to +60 °C|
|Operating temperature||-20 to +50 °C||-20 to +50 °C||-20 to +50 °C||-10 to +50 °C|
|Battery type||3 micro
|Battery life||15 hrs||200 hrs||250 hrs||30 hrs|
200 x 30 x 41 mm
154 x 43 x 21 mm
40 mm Vane diameter
243 x 30 x 24 mm
100 mm probe shaft
|140 x 36 x 25 mm|
|Laser marketing||-||-||-||Diffractive optics
|Emissivity||-||-||-||0.1 to 1.0 adjustable|
Product The Fieldpiece Dual-Temperature Meter, model ST4, measures two temperatures simultaneously using the included k-type, wrap tab beaded thermocouples. The technology inside the ST4 provides superior temperature compensation in rapidly changing environments commonly found while performing field service. Use the ST4 to find Delta T and just about any temperature split you want to measure. Displays T1, T2 and T1-T2 in big numbers on the LCD screen. Features two front face calibration pots and comes in our clear front case with magnetic hanger model ANC6. Use with our optional ATWB1 wet bulb thermocouple to help you find target superheat...
Product The Fieldpiece SIG1 Gun Style Infrared Thermometer is a low cost, standalone non-contact infrared thermometer. Simply aim the Fieldpiece SIG/1 thermometer at the target and pull the trigger to display the surface temperature of an object. The temperature measured will be the average of all the temperatures in the field of view. The closer you are to the target, the smaller the area; The further away, the larger the area measured. The infrared temperature measurement is fast and easy. The Fieldpiece SIG-1 works best for fast readings, relative readings (one to another or the same one at different...
Product Convenient 2-Way Temperatures Folding ROD thermometer with 8:1 IR Great to quickly assess a system Folding ROD for in duct measurements 8:1 IR for register and ambient temps Hands free in-duct measurements Quickly calculates T1 - T2 across both ROD and IR AUTHORISED RETAILER Buy with 100% confidence knowing your purchase is backed by the full Manufacturers Warranty. Please register your product with provided warranty card. SCROLL UP AND "ADD TO CART" TODAY.
Product The 52228 Digital Differential Thermometer provides instant measurements of TWO points. (T1, T2) and T1 – T2. FEATURES AND SPECIFICATIONS Max Hold Function Data Hold Function Temperature in ºF or ºC AUX Out-Put Jacks T1 – T2 Differential Type K Thermocouple Input Temp. Range: -50 to 1999ºF (-50 to 1300ºC) Resolution: 1ºF (1ºC) Includes two 3 ft Thermocouple Probes