$592.00 inc GST
Estimated Delivery Between and .
The testo smart tools refrigeration set is a combination of four instruments to measure high-side and low-side pressures and temperatures of A/C and refrigeration systems. Configured to be used during commissioning, servicing, PM and troubleshooting A/C and refrigeration systems. This kit can be operated with no tools other than your smart phone to communicate with the instruments.
Measures CFC, HFC, HCFC, N, H2O, CO2.
Hose free installation on refrigeration systems.
Easy calculation of Super heat & Sub cool.
Report creation and transfer via smart phone.
The measuring instruments can be connected quickly and easily to your smartphone or tablet via Bluetooth for App-controlled servicing and troubleshooting on refrigeration systems, air conditioning systems and heat pumps.
Operation of the measuring instruments is state-of-the-art and extremely easy. Both the testo 115i and the testo 549i can be set up quickly and easily, directly at the temperature measuring point or pressure connection. They also make working on widely spaced measuring points considerably easier thanks to wireless connection to a smartphone or tablet.
Also practical: no hoses are required for measurements, meaning that no or only very little refrigerant is lost. The handy testo Smart Case enables the measuring instruments to be conveniently transported and ensures that they are always to hand when they are needed
The testo Smart Probes App is a powerful and easy-to-use tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results
Measurement data is transmitted wirelessly from the relevant measuring instrument to the Smart Probes App and can be viewed conveniently on mobile terminal devices – either as a chart or in table form. The App also offers practical functions such as timed and multi-point mean calculation, volume flow configuration or a pressure drop test. The measurement data log can be emailed directly as a PDF or Excel file. This saves you time, allowing you to further increase your efficiency.
- iOS 8.3 or later
- Android 4.3 or later
- Bluetooth 4.0
What's Included: testo 115i (x2), testo 549i (x2), testo smart Case (refrigeration), batteries & calibration protocol.
|testo 115i||testo 549i|
|Measuring range||-40 to +150 °C||-1 to 60 bar|
|Accuracy ±1 digit||±1.3 °C (-20 to +85 °C)||0.5 % of final value|
|Resolution||0.1 °C||0.01 bar
|Connection||-||7/16" – UNF|
|Overload rel.||-||65 bar|
Requires mobile end device with Bluetooth 4.0
Requires mobile end device with Bluetooth 4.0
|Storage temperature||-20 to +60 °C||-20 to +60 °C|
|Operating temperature||-20 to +50 °C||-20 to +50 °C|
|Battery type||3 micro batteries AAA||3 micro batteries AAA|
|Battery life||250 hrs||150 hrs|
|Dimensions||183 x 90 x 30 mm||125 x 32 x 31 mm|
|Measurable media||-||CFC, HFC, HCFC, N, H2O, CO2|
Product Download Brochure FAQ The compact heating set with the testo 115i clamp thermometer, the testo 510i differential pressure measuring instrument and the testo 805i infrared thermometer is ideal for important measuring tasks performed by heating engineers. Key Features: All necessary measuring instruments in a handy bag Check measured data wireless on mobile device Data log and plot data graphically and in excel spreadsheet format on mobile device Send measured value report in .pdf or excel file format via email The advantages of the heating set In conjunction with your Smartphone or Tablet, all heating system temperatures and pressures...
Product Download Brochure FAQ The testo VAC Smart Probe Set provides a combination of four instruments needed to test and balance a multi outlet ventilation system. Two types of anememoters give you the capacity to measure in-duct air flow and the flow from each vent. Using an IR temperature probe for surface temperatures will show you motor and electrical equipment conditions and an easy check of each outlet. The thermohygrometer will provide an assessment of the humidity and dewpoint concerns throughout the system Key Features:Measures air velocity, temperature, relative humidity, wet bulb / dew point, volume flow. Kit includes...
Product Download Brochure FAQ Combined with a smartphone or tablet, the testo 115i clamp thermometer is the ideal temperature measuring instrument for carrying out servicing and troubleshooting on air conditioning and refrigeration systems, as well as for installing them. It can also be used to measure flow and return temperatures. - Measurement of the flow and return temperature of heating systems- Measurement of temperatures in refrigeration systems in order to calculate superheating and subcooling- Easy to use at measuring points that are far apart- Rapid detection of temperature changes via graphical progress display Professional measuring technology is now mobile:...