$399.00 inc GST
Estimated Delivery Between and .
• The easiest and most accurate gun available today.
• No guesswork - a pre-measured application every time.
• One squeeze injects a pre-measured amount (1/8 oz.) of dye. No more adding too much dye.
• Brightest dyes in the industry, exceeds all industry performance standards
• OEM backed and approved
• Meets the new SAE J2297 standard for use with both R134A and R1234YF
Kit includes: Injection gun and fluorescent leak detection dye
Fieldpiece 2-Port Manometer Pressure. Suitable for Air, LPG & Nat. Gas SDMN5 Whats Included? Dual-Port Manometer - SDMN5 2 – 3/16” Tubes with Brass Fittings 2 – 3/16” to 5/16” Tube Adapters - RMA316 9V Battery (installed) Operator’s Manual Benefits The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. ...
Fieldpiece 2-Port Manometer with inbuilt Air Pump SDMN6 Whats Included? SDMN6 - Dual Port Manometer and Pressure Switch Tester ANC1 - Four Pocket Carrying Case ASP2s - Static Pressure Probes RMA316 - Pressure Tubes Quick Connect Leads Hoses and Y-splitter Hoses with Brass Screw Fittings Benefits The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...