Robinair Combustable gas detector TIF8900-A
TIF8900A
$825.00 inc GST
Estimated Delivery Between and .
Product Description
The Robinair TIF8900 is the perfect tool to be used in a situation where a combustible gas, vapor or residue needs to be found.
It is a super-sensitive, cordless, combustible gas detector that detects a broad range of natural gases including propane, methanol, butane, and gasoline.
Its uses include: Gas lines and Pipes, Exhaust and Fuel leaks, Propane filling stations, Fuel in marine bilges, Heat Exchanger leaks, Check manholes for safety, Detect arson residue, IAQ tests, and Liquid or gas fired heating systems.
- Solid state sensor technology, long life and precision
- Broad band of combustible gas detection
- Sensitivity as low as 5 ppm
- Adjustable sensitivity
- Audible "Geiger counter" signal
- LED Leak Intensity Lights
- Automatic warm up
- Cordless operation
- Flexible 16" stainless probe for hard to reach places
- Rechargeable battery and charger included
- Rugged custom carrying case
- Made in the USA.
Related Items
Fieldpiece 2-Port Manometer Pressure. Suitable for Air, LPG & Nat. Gas SDMN5
$297.87
Product The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements...
Fieldpiece 2-Port Manometer with inbuilt Air Pump SDMN6
$548.63
Product The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure...
Fieldpiece 400A Amp Clamp Accessory Head ACH4
$91.25
PRODUCT DESCRIPTION The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on the meter. The ACH4 works with the Fieldpiece “Stick” meter, EHDL1 Electronic Handle, EH4W Wireless Handle, DL3 Data Logger, the HG2 and HG3 HVAC Guide® System Analyzers, or any other digital multimeter (with mVAC range) connected by Fieldpiece ADLS2 detachable silicone leads or AHDL1...
Fieldpiece Air Velocity and Temperature Accessory Head AAV3
$225.23
Product The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes. The AAV3 Anemometer Air Velocity and Temperature Accessory offers several features and benefits to field technicians: Works...
