$199.00 inc GST
Estimated Delivery Between and .
2 Piston valve multi-refrigerant manifold designed for R134a, R22, R404A and R406 refrigerants, with 90cm hose set and 70mm gauge head.
• High quality extruded aluminium body, precisely machined and colour anodized
• Teflon diaphragm-valve mechanism, excellent sealing & large flow
• 80mm gauges with soft cushion protective cover, class 1.0 accuracy, pulse-free pointer, zero-pointed calibration, and colour coded
• Extra large sight glass for visual refrigerant check
• Soft ergonomic with colour coded knobs • Heavy-duty swivel hanging hook
• Goodyear GY5 hose sets meet UL1963 & SAE J196 standard, 800psi (55bar) working pressure, 4000psi (276bar) burst pressure
Note: Can be used for automotive purposes, just requires high and low side couplers
Product The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements...
Product The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...
Fieldpiece Air Velocity and Temperature Accessory Head AAV3 Whats Included? Air Velocity and Temperature Accessory - AAV3 9V Alkaline Battery (installed) Operator’s Manual Easy to Use Vane Anemometer Air Velocity and Temperature Estimate CFM Large vane covers most of register's free area Displays average measurement and real-time Benefits The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and...