2601
$324.00 inc GST
Estimated Delivery Between and .
The 2601 Quik-Start starts all single phase compressors
up to 5 HP 240V AC.
A trouble-shooting aid for determining whether fault lies with compressor or component parts.
Fusetron protects against shorts and overloads, but allows high starting load.
Capacitor leads provide means of starting split phase, capacitor start, or permanent split capacitor
compressors.
Includes the 2136, a 300mm 3-wire grounded power cord with standard female plug on one end and insulated clips on the other end for powersource connection.
SKU | 2601 |
Brand | Imperial |
Shipping Weight | 1.0000kg |
Shipping Width | 0.200m |
Shipping Height | 0.050m |
Shipping Length | 0.200m |
Shipping Cubic | 0.002000m3 |
Unit Of Measure | ea |
Assembled Length | 0.200m |
Assembled Height | 0.050m |
Assembled Width | 0.200m |
$445.00
Imperial Mini-VAC Manifold & Valve 1833 Mini-VAC Manifold & Valve NOTE: This is not a vacuum gauge, manifold and valve only. These vacuum accessories will help you make easy vacuum connections in many types of systems. Mini-Vac is a compact High Vacuum Manifold which provides a 3/8” flare yoke and an electronic vacuum gauge sensor port (sensor not included). Features a 3/8” packless diaphragm valve to isolate the vacuum pump from the system. The Mini-Vac mounts on the pump with a 3/8” quick coupler.
Sold Out
Product 127-CO RATCHET WRENCH127-CO Same as 127-C except with unique 25° offset that provides additional convenience in hard to reach places.Offset Square Ratchet, 1/4", 3/16", 5/16" Sq. Drive; 9/16" with Hex Drive
$34.95
Product 127-C Compressor access Service Valve wrench. Has 1/4”, 3/8”, 3/16” and 5/16” square drive ratchets and is specially designed for use on compressors with access valves in hard to reach places. Reversible ratchets Chrome plated
$634.00
Cylinder Heater for Refrigerant Bottles : Wrap around type 240 VAC A quick & convenient easy-to-use means to pressurise refrigerant supply cylinders to move any refrigerant to another vessel or charging dispenser, the 3054 Cylinder Heater is designed to fit around refrigerant containers. It also can be used with many recovery units. The device consists of a 150mm wide x 600mm long flexible silicone rubber heating element with extra-Iong Velcro straps. It includes a built-in molded thermostat preset @ 55°C. The heater draws approx 200 watts of Power. Plug is a three pin for standard Australian Power Outlets. SKU 3054-240VAC Brand Imperial Weight 0.5000kg Width...