$235.89 inc GST
Estimated Delivery Between and .
To assist HVACR professionals in getting the proper measurements, Fieldpiece engineered this in-duct psychrometer head to take measurements in the duct where they are supposed to be taken -- near the evaporator! So HVACR professionals can trust the results for tests like temperature splits, target evaporator exit temperature, target superheat, and CheckMe!® because measurements are taken without the interference of outside air temp or leaks in the duct work.
* Plus, the ARH5 can make hustling from condenser, to attic, and back again to take indoor wet bulb and charge a system, a thing of the past! When attached to a wireless transmitter, ARH5 measurements can be sent wirelessly to any Fieldpiece wireless meter (HG3, LT17AW, EH4W), and SMAN4 Wireless Digital Manifold from anywhere on the job site. So results like indoor wet bulb, can be read in real-time on your wireless meter from up to 100' away.
Like all Fieldpiece products, the ARH5 accessory head was engineered specifically to put the right tools in the hands of HVACR professionals. For even more convenience and time savings, Fieldpiece designed the 38" telescoping probe with laser etching so techs know the sensor is in the correct location, and is facing in the proper direction. With the quick-response sensor it's a snap to complete target superheat, and take target evaporator exit temperature tests.
Designed specifically for HVACR professionals, the ARH5 InDuct Psychrometer is a great tool to properly charge fixed restrictor systems. More than 70% of A/C units are improperly charged, and therefore running inefficiently, but with the ARH5 it's easier to ensure units are running at their maximum efficiency.
Fieldpiece 2-Port Manometer Pressure. Suitable for Air, LPG & Nat. Gas SDMN5 Whats Included? Dual-Port Manometer - SDMN5 2 – 3/16” Tubes with Brass Fittings 2 – 3/16” to 5/16” Tube Adapters - RMA316 9V Battery (installed) Operator’s Manual Benefits The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. ...
Fieldpiece 2-Port Manometer with inbuilt Air Pump SDMN6 Whats Included? SDMN6 - Dual Port Manometer and Pressure Switch Tester ANC1 - Four Pocket Carrying Case ASP2s - Static Pressure Probes RMA316 - Pressure Tubes Quick Connect Leads Hoses and Y-splitter Hoses with Brass Screw Fittings Benefits The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...