$860.54 inc GST
Estimated Delivery Between and .
The SMAN360 is a fantastic vacuum/micron equipped digital manifold that can also measure superheat and subcooling. This is a must have for any professional in the field.
The SMAN360 automatically calculates target superheat, so HVACR professionals don't have to worry about guesswork or manual calculations.
WIth the SMAN360 you also get a built-in micron gauge with resolution from 50 to 9,999, plus the vacuum gauge in the SMAN360 digital refrigerant manifold has a micron alarm which allows technicians to set the alarm to a chosen micron level, and when the vacuum reaches that level, the alarm will sound, freeing you up to keep working when pulling a vacuum.
In addition the SMAN series are the only manifolds with the ability to perform a linear adjustment of the pressure sensors based on refrigerant type, temperature, and pressure, and it's so easy, you can do it right in the field.
By combining new technology and its rugged design with an intuitive, easy-to-use interface, the SMAN360 makes it easy for you to quickly maximise the efficiency of any A/C or refrigeration unit. And because they're built by the HVACR industry's leading innovator, you know it's packed with the features you want.
Buy with 100% confidence knowing your purchase is backed by the full Manufacturers Warranty. Please register your product with provided warranty card.
Product The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements...
Product The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...
Fieldpiece Air Velocity and Temperature Accessory Head AAV3 Whats Included? Air Velocity and Temperature Accessory - AAV3 9V Alkaline Battery (installed) Operator’s Manual Easy to Use Vane Anemometer Air Velocity and Temperature Estimate CFM Large vane covers most of register's free area Displays average measurement and real-time Benefits The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and...