$326.00 inc GST
Estimated Delivery Between and .
The SRH3 In-duct Psychrometer is a great tool to properly charge fixed restrictor systems by quickly determining the target superheat, and to help determine optimum airflow across the evaporator with a target evaporator exit temperature test.
To assist HVACR professionals get the proper measurements, Fieldpiece engineered this in-duct psychrometer to take measurements in the duct where they are supposed to be taken -- near the evaporator!
The 38" telescoping probe's laser etched ruling and flattened edges allows techs to locate proper measurement points within a duct, and ensures that the probe is properly aligned.
With the quick sensor it's a snap to determine target superheat, and take target evaporator exit temperature tests.Designed specifically for HVACR professionals, the SRH3 In-Duct Diagnostic Psychrometer is a great tool to properly charge fixed restrictor systems.
More than 70% of A/C units are improperly charged, and therefore running inefficiently, but with the SRH3 it's easier to ensure units are running at their maximum efficiency.
Like all Fieldpiece products, the SRH3 digital psychrometer was engineering specifically for HVACR professionals. It contains the specific measurements and tests techs need, without any they don't.
Because it automatically calculates target superheat and target evaporator exit temperature, PT charts and written math are a thing of the past. Plus the dual display with bright backlight, and rugged rubber boot with probe clips make sure the SRH3 is ready for any job.
Fieldpiece 2-Port Manometer Pressure. Suitable for Air, LPG & Nat. Gas SDMN5 Whats Included? Dual-Port Manometer - SDMN5 2 – 3/16” Tubes with Brass Fittings 2 – 3/16” to 5/16” Tube Adapters - RMA316 9V Battery (installed) Operator’s Manual Benefits The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. ...
Fieldpiece 2-Port Manometer with inbuilt Air Pump SDMN6 Whats Included? SDMN6 - Dual Port Manometer and Pressure Switch Tester ANC1 - Four Pocket Carrying Case ASP2s - Static Pressure Probes RMA316 - Pressure Tubes Quick Connect Leads Hoses and Y-splitter Hoses with Brass Screw Fittings Benefits The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...