$884.73 inc GST
Estimated Delivery Between and .
The SCL2 is a portable CO2 (R-744) leak detector with a superior combination of sensitivity, speed, sensor life, battery life, portability, and ease of use. Find leaks
Find leaks on commercial refrigeration systems, restaurant soda machines, or any other system using R-744. Pinpoint tiny leaks in high concentration CO2 environments with ease. Gas is pumped through the tip of the wand into the sensor within the SCL2 body. The sensor detects changes in concentration, not absolute concentration, allowing the SCL2 to differentiate CO2 concentrations higher than concentrations normally found in ambient air. The SCL2 detects leaks as small as 6 grams/yr (0.2 oz/yr). The SCL2 has three sensitivity settings to keep false triggering to a minimum. A quick and automatic
The sensor detects changes in concentration, not absolute concentration, allowing the SCL2 to differentiate CO2 concentrations higher than concentrations normally found in ambient air. The SCL2 detects leaks as small as 6 grams/yr (0.2 oz/yr).
The SCL2 has three sensitivity settings to keep false triggering to a minimum. A quick and automatic 30 second self-calibration upon power-up ensures optimal performance.
The SCL2 comes with a wall and car charger for its ultra-compact lithium-ion battery which powers the SCL2 for 8hrs of continuous operation before a recharge is needed.
Buy with 100% confidence knowing your purchase is backed by the full Manufacturers Warranty. Please register your product with provided warranty card.
Product The SDMN5 is a portable, rugged dual-port manometer designed especially for HVACR field service technicians. Measures gas pressure, static pressure and pressure differential. The SDMN5 includes a zero adjust button of the face of the meter, a rugged rubber boot, a magnet on the back for hanging the meter during service, and the Auto Power-Off (APO) function conserves battery life. The SDMN5 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The SDMN5 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements...
Product The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure...
Fieldpiece 400A Amp Clamp Accessory Head ACH4 Whats Included? 400A Amp Clamp Accessory - ACH4 Operator’s Manual Current Clamp Head Measure AC Amps up to 400A Jaw claw helps isolate wires for testing Find run/start amps of motors and compressors Great partner for stick multimeters Benefits The ACH4 current clamp is a small size accessory head for quickly reading up to 400 AC amps. The claw feature on the clamp makes it easy to quickly pick out the wire you need to measure. Once the current carrying conductor is isolated, the amperage is converted to mVAC for reading directly on...
Product The AAV3 is an anemometer accessory head for use with our modular instruments that measures air velocity and temperature in English or Metric units: Ft/min, M/s, MPH, KM/hr, ºF (degrees Fahrenheit) or ºC (degrees Celsius). Multiply your air velocity by the register’s free area to estimate CFM or diagnose duct blockages and quickly check the airflow balance in a conditioned space. Use with our DL3 Data Logger to track airflow or temperature over time. Features average and real time testing modes. The AAV3 Anemometer Air Velocity and Temperature Accessory offers several features and benefits to field technicians: Works...