$634.00 inc GST
Estimated Delivery Between and .
A quick & convenient easy-to-use means to pressurise refrigerant supply cylinders to move any refrigerant to another vessel or charging dispenser, the 3054 Cylinder Heater is designed to fit around refrigerant containers.
It also can be used with many recovery units.
The device consists of a 150mm wide x 600mm long flexible silicone rubber heating element with extra-Iong Velcro straps.
It includes a built-in molded thermostat preset @ 55°C. The heater draws approx 200 watts of Power.
Plug is a three pin for standard Australian Power Outlets.
|Unit Of Measure||ea|
The 2601 Quik-Start starts all single phase compressorsup to 5 HP 240V AC. A trouble-shooting aid for determining whether fault lies with compressor or component parts. Fusetron protects against shorts and overloads, but allows high starting load. Capacitor leads provide means of starting split phase, capacitor start, or permanent split capacitorcompressors.Includes the 2136, a 300mm 3-wire grounded power cord with standard female plug on one end and insulated clips on the other end for powersource connection. SKU 2601 Brand Imperial Weight 1.0000kg Width 0.200m Height 0.050m Length 0.200m Cubic 0.002000m3 Unit Of Measure ea Assembled Length 0.200m Assembled Height...
Imperial Mini-VAC Manifold & Valve 1833 Mini-VAC Manifold & Valve NOTE: This is not a vacuum gauge, manifold and valve only. These vacuum accessories will help you make easy vacuum connections in many types of systems. Mini-Vac is a compact High Vacuum Manifold which provides a 3/8” flare yoke and an electronic vacuum gauge sensor port (sensor not included). Features a 3/8” packless diaphragm valve to isolate the vacuum pump from the system. The Mini-Vac mounts on the pump with a 3/8” quick coupler.
Product 127-CO RATCHET WRENCH127-CO Same as 127-C except with unique 25° offset that provides additional convenience in hard to reach places.Offset Square Ratchet, 1/4", 3/16", 5/16" Sq. Drive; 9/16" with Hex Drive
Product 127-C Compressor access Service Valve wrench. Has 1/4”, 3/8”, 3/16” and 5/16” square drive ratchets and is specially designed for use on compressors with access valves in hard to reach places. Reversible ratchets Chrome plated