1800 870 382

Call us Toll Free or Chat Now

SHOPPING CART

No Products in the Cart

TOTAL:
$0.00
Mastercool Combustible Gas Leak Detector 55975
Mastercool Combustible Gas Leak Detector in the box 55975
  • SKU: 55975

Mastercool Combustible Gas Leak Detector - 55975

$478.10 $566.95
GST included.
    DESCRIPTION

    At the heart of this leak detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity. The new sensor is characterised by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases.

    For this reason, this sensor was selected and integrated into the 55975 Combustible Gas Leak Detector.

    In addition, a powerful microprocessor was integrated into the design that automatically selects the best operating condition for the sensor to ensure optimum performance throughout its life.

    IntellaSense III Combustible Gas Leak Detector comes in a blow-moulded case with 2 “C” batteries, leak test vial and replacement filters.

    FEATURES AND SPECIFICATIONS

    • Detects combustible gases (see below)
    • Heated tin oxide sensing element
    • 2000 hour sensor life
    • Less than 1 second respond time
    • 50 – 1000 ppm ultimate sensitivity
    • Battery: 2 “C” Alkaline 6000 mAh batteries
    • Operating Temperature Range: 0˚F to 120˚F
    • Intelligent tip 15″” inch probe length with environment sensing element to eliminate the potential of false alarms
    • Six vertical LED display with enabled selectively (red, yellow or green) to display information to the user such as the relative signal level of the detected leak, the selected sensitivity range (low/medium or high) of the unit, diagnostic information such as low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit
    • Keypad control with ON/OFF button (push-on/push-off), Volume/Mute button (high, low or mute), Sensitivity button for high, medium and low sensitivity level selection and Peak button when multiple leaks are suspected (push enable/disable)

    DETECTS: Acetone, Acetylene, Ammonia, Benzene, Butane, Butanol, Chlorine, Ethane, Ethanol, Gasoline, Hexane, Hydrogen, Hydrogen Sulfide, Isobutane, Methane (natural gas), Methanol, Methyl Acetate, Methyl Chloride, Methyl Ether, Naptha, N-Butane, Pentane, Propane, Propanol, Sulfer Dioxide and Trichloroethane

    REPLACEMENT PARTS:
    55800-FILTER
    : 3 replacement filters
    55800-VL: Leak test vial

    AUTHORISED RETAILER

    Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.

    SCROLL UP AND "ADD TO CART" TODAY.

    SHIPPING

    Australia-wide Flat Rate shipping of $15.00 per order.
    This includes multiple products up to 5kg only.

    Additional cost applies for orders over 5kg. Contact us for quotation.

    REVIEWS

    RELATED PRODUCTS



    SELLER REVIEWS


    BACK TO TOP